Mitsubishi Single Zone Indoor Units
Mitsubishi Electric’s technologically advanced mini-split air conditioners and heat pumps can provide superior comfort, lower energy costs, zero emissions, and ultra-quiet heating and air conditioning in any climate. Learn more by exploring our solutions below.


WALL-MOUNTED
The MSZ Series wall mounted indoor units offer functional design, quiet operations and comfort. With multiple operating modes, multiple fan speeds, and multiple airflow directions, these units fits the needs of nearly any room.
| Model | Clg MBH | SEER | Htg MBH | HSPF | I-See | Hyper-Heat |
|---|---|---|---|---|---|---|
| MSZ-GL06 | 6.0 | 24.6 | 7.2 | 1.8 | No | Yes |
| MSZ-GL09 | 9.0 | 24.6 | 10.9 | 12.8 | No | Yes |
| MSZ-GL12 | 12.0 | 23.1 | 14.4 | 12.5 | No | Yes |
| MSZ-GL15 | 14.0 | 21.6 | 18.0 | 11.7 | No | Yes |
| MSZ-GL18 | 18.0 | 20.5 | 21.6 | 11.2 | No | Yes |
| MSZ-GL24 | 22.4 | 20.5 | 27.6 | 10.0 | No | Yes |
| MSZ-FH06 | 6.0 | 33.1 | 8.7 | 13.5 | Yes | Yes |
| MSZ-FH09 | 9.0 | 30.5 | 10.9 | 13.5 | Yes | Yes |
| MSZ-FH12 | 12.0 | 26.1 | 13.6 | 12.5 | Yes | Yes |
| MSZ-FH15 | 15.0 | 22.0 | 18.0 | 12.0 | Yes | Yes |
| MSZ-FH18 | 17.2 | 21.0 | 20.3 | 12.0 | Yes | Yes |
- Advanced Filtration System Two advanced filters to clean and deodorize the circulated air. The deodorizing filter absorbs any offending smells, while the second is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.
- I-See Sensor 3D (FH Units Only) Monitors its zone for fluctuations in temperature. If it detects an underserved area, the unit will temporarily direct airflow to that area. It also enters energy saving mode if no human heat signatures are detected.
- Hot Start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.
- Vane Control Two vane control options, standard and wide. Auto mode selects the best vane position based on operating mode while swing mode cycles through each vane position.


FLOOR-MOUNT
Multi-flow vanes allow for fast warm up and efficient operation.
| Model | Clg MBH | SEER | Htg MBH | HSPF | I-See | Hyper-Heat |
|---|---|---|---|---|---|---|
| MFZ-KJ09NA | 9.0 | 28.2 | 11.0 | 13.0 | No | Yes |
| MFZ-KJ12NA | 12.0 | 25.5 | 13.0 | 13.6 | No | Yes |
| MFZ-KJ15NA | 15.0 | 21.8 | 18.0 | 11.6 | No | Yes |
| MFZ-KJ18NA | 17.0 | 21.0 | 21.0 | 11.3 | No | Yes |
Multiple Vane Control Options Auto mode selects the best vane position based on operating mode, and the swing modes cycle through all positions for maximum coverage.


HORIZONTAL-DUCTED
New home construction is the perfect opportunity to take advantage of the efficiency and unique design of Mitsubishi Electric Zoned Comfort Solutions®. Our horizontal-ducted units use less ductwork than traditional systems and can be hidden either above the ceiling or below the floor.
| Model | Clg MBH | SEER | Htg MBH | HSPF | Fan Speeds | Static Press. Max |
|---|---|---|---|---|---|---|
| PEAD-A09AA7 | 9.0 | 19.4 | 11.4 | 11.5 | 3 | 0.6" |
| PEAD-A12AA7 | 12.0 | 18.6 | 16.3 | 10.9 | 3 | 0.6" |
| PEAD-A15AA7 | 15.0 | 18.6 | 21.0 | 12.1 | 3 | 0.6" |
| PEAD-A18AA7 | 18.0 | 18.8 | 24.7 | 11.5 | 3 | 0.6" |
| PEAD-A24AA7 | 24.0 | 19.6 | 26.0 | 10.8 | 3 | 0.6" |
| PEAD-A30AA7 | 30.0 | 19.1 | 32.0 | 10.8 | 3 | 0.6" |
| PEAD-A36AA7 | 36.0 | 19.1 | 38.0 | 9.9 | 3 | 0.6" |
| PEAD-A42AA7 | 42.0 | 45.0 | 16.1 | 10.0 | 3 | 0.6" |


CEILING CASSETTE
Sleek and modern ceiling-mounted options include EZ FIT® recessed ceiling cassettes that fit between standard joists, 4-way recessed ceiling cassettes, and ceiling-suspended units.
| Model | Clg MBH | SEER | Htg MBH | HSPF | I-See | Fan Speeds |
|---|---|---|---|---|---|---|
| MLZ-KP09NA | 9.0 | 12.0 | No | 5 | ||
| MLZ-KP12NA | 12.0 | 15.0 | No | 5 | ||
| MLZ-KP18NA | 18.0 | 21.0 | No | 5 | ||
| SLZ-KF09NA | 9.0 | 22.4 | 11.0 | 12.2 | Yes | 3 |
| SLZ-KF12NA | 12.0 | 22.0 | 13.0 | 11.4 | Yes | 3 |
| SLZ-KF15NA | 15.0 | 19.8 | 18.0 | 11.2 | Yes | 3 |
| SLZ-KF18NA | 17.7 | 20.7 | 19.7 | 11.6 | Yes | 3 |
Mitsubishi Outdoor Ductless Mini-Split Heat Pumps
For over 50 years, Mitsubishi has remained at the forefront of the mini split industry thanks to their dedication to providing efficient, user-friendly comfort solutions. Mitsubishi is committed to achieving total customer satisfaction and year after year they do just that.
Mitsubishi Electric’s technologically advanced mini-split air conditioners and heat pumps can provide superior comfort, lower energy costs, zero emissions, and ultra-quiet heating and air conditioning in any climate. Learn more by exploring our solutions below.


MUZ-GL Series
- Advanced Filtration System: combines a hybrid catechin deodorizing filter with an enzyme-based filter for managing allergens. The anti-allergy filter not only captures the offending particles, it also breaks them down, cleaning the air as it is conditioned.
- Hot Start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.
- Kumo Cloud Compatible Control every zone in your home from the palm of your hand. The Kumo Cloud App allows easy access and control with any smartphone or internet browser.
- Precision Temperature Control Technology The outdoor condenser is equipped with inverter technology and an electronic linear expansion valve. These components improve temperature accuracy and system efficiency through precise adjustments of both compressor speed and refrigerant flow.
- Blue Fin Condenser allows you to save a cooling profile consisting of a temperature, a fan speed, and an airflow direction. This profile can be activated easily with a single press of the Smart Set button on the remote controller.
| Model | Clg MBH | SEER | Htg MBH | HSPF | Min Op °F |
|---|---|---|---|---|---|
| MUZ-GL09 | 9.0 | 24.6 | 10.9 | 12.8 | -9° |
| MUZ-GL12 | 12.0 | 23.1 | 14.4 | 12.5 | -9°F |
| MUZ-GL15 | 14.0 | 21.6 | 18.0 | 11.7 | -9° |
| MUZ-GL18 | 18.0 | 20.5 | 21.6 | 11.2 | -9° |
| MUZ-GL24 | 22.4 | 20.5 | 27.6 | 10.0 | -9 |


MUZ-FH Hyper-Heat
- Precision Temperature Control Technology Condensers are equipped with inverter technology and an electronic linear expansion valve. By adjusting compressor speed and refrigerant flow, the unit matches output to the zone for precise temperature control and improved efficiency.
- H2i Technology Low or negative ambient temperatures don’t bother the MUZ-FH series. It is rated for 100% heating capacity at 5° and continues to provide heating in outdoor conditions as low as -13°.
- Advanced Filtration System: combines a hybrid catechin deodorizing filter with an enzyme-based filter for managing allergens. The anti-allergy filter not only captures the offending particles, it also breaks them down, cleaning the air as it is conditioned.
- Integrated Base Pan Heater The factory-installed base pan heater prevents condensate from freezing and damaging the unit in frigid climates as well as saving you time and money from costs accumulated by an installer adding a base pan heater later.
- Hot Start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.
- Kumo Cloud Compatible Control every zone in your home from the palm of your hand. The Kumo Cloud App allows easy access and control with any smartphone or internet browser.
- Blue Fin Condenser allows you to save a cooling profile consisting of a temperature, a fan speed, and an airflow direction. This profile can be activated easily with a single press of the Smart Set button on the remote controller.
| Model | Clg MBH | SEER | Htg MBH | HSPF | Min Op °F |
|---|---|---|---|---|---|
| MUZ-FH06 | 6.0 | 33.1 | 8.7 | 13.5 | -18° |
| MUZ-FH09 | 9.0 | 30.5 | 10.9 | 13.5 | -18° |
| MUZ-FH12 | 12.0 | 26.1 | 13.6 | 12.5 | -18° |
| MUZ-FH15 | 15.0 | 22.0 | 18.0 | 12.0 | -18° |
| MUZ-FH18 | 17.2 | 21.0 | 20.2 | 12.0 | -18° |


PUZ-HA Hyper-Heat
- H2i Technology H2i P-Series units recover heat energy that is normally wasted in the flash process within the outdoor coil. H2i flash technology helps the system overcome issues associated with conventional heat pumps, such as decreases in low-side pressure, refrigerant mass flow rate, and operational capacity. What you’ll see is that the H2i P-Series units deliver 100% of rated heating capacity at 5˚ and 80% at -13˚.
- Hot Start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.
- Auto Cooling/Heating Changeover When set to auto mode, P-Series systems continuously monitor indoor air temperatures, sensing when a space requires cooling or heating. The units automatically switch operation as needed to maintain a consistent level of comfort.
- Automatic restart provides peace of mind and ease of use in the event of power outage.
- Line lengths up to 245 ft.
- Kumo Cloud and RedLINK™ Compatible Control every zone from the palm of your hand. The Kumo Cloud App allows easy access and control with any smartphone or internet browser.
- Blue Fin Condenser allows you to save a cooling profile consisting of a temperature, a fan speed, and an airflow direction. This profile can be activated easily with a single press of the Smart Set button on the remote controller.
| Model | Clg MBH | SEER | Htg MBH | HSPF | Min Op °F |
|---|---|---|---|---|---|
| PUZ-HA30 | 25.0 | 21.5 | 26.0 | 12.0 | -13° |
| PUZ-HA36 | 33.0 | 17.8 | 40.0 | 10.4 | -13° |
| PUZ-HA42 | 42.0 | 14.5 | 54.0 | 10.4 | -13° |
